09/march/2015

1. lots of link fixes

01/march/2015

1. restarted the repository at geda-symbols.org

2/february/2015

1. made pin 1 of DIP-footprints square
2. increased clearance of DIP footprints
3. Fixed set_clearance.sh so the clearance is as stated, not half of it
4. added MENTOR_quad_light_pipe_1276.1004.fp and MENTOR_quad_light_pipe_1276.1004.fp

30/january/2015

1. added ULN2803.sym, ULN2803_pwr.sym
2. added optocoupler_quad.sym
3. removed PS_1x*PIN.fp --> these were renamed to PS_*PIN.fp a while ago
4. corrected pin numbers of oblate pins in DIP**.fp
5. added DIP22.fp, DIP32.fp, DIP32_wide.fp, DIP36_wide.fp, DIP4.fp, DIP48_wide.fp

28/january/2015

1. added Copernicus2.fp

26/january/2015

1. regularized quad comparators --> footprint and value in power symbol
2. obsoleted led_3mm.sym and led_SMD.sym

18/january/2015

1. added ATXmegaB3.sym
2. added ATXmegaB1.sym
3. added ATXmegaC4.sym
4. added ATXmegaC3.sym

17/january/2015

1. added ATXmega4.sym
2. added ATXmega3.sym
3. added ATXmegaE5.sym
4. corrected TQFP100.fp and moved to TQFP100-05
5. added TQFP32-08.fp
6. added TQFP44-05.fp
7. added TQFP44-08.fp
8. added TQFP64-08.fp
9. corrected the HTML-links of switches

28/november/2014

1. added footprints for dipswitches
2. added a subdir "dipswitches" in the footprint lib

12/november/2014

1. corrected con_1x16.sym and con_1x18.sym
2. added 1x12PIN.fp
3. added 1x14PIN.fp
4. added 1x16PIN.fp
5. added 1x18PIN.fp
6. added item "project" to titleblock.sym

16/october/2014

1. schaltplandruck.sh : Make sure, the title page is printed on top

14/october/2014

1. added symbols for LM13700: ota_LM13700_buffer.sym, ota_LM13700_pwr.sym, ota_LM13700.sym
2. added analog_SPST.sym block symbol
3. moved block/opamp_inverter.sym to block/opamp_adder.sym
4. added blocks with beansstalks of resistors
5. beautified transistor symbols npn_transistor.sym and pnp_transistor.sym

06/october/2014

1. added panel_mount_BI898.fp
2. streamlined the names of hole-footprints -- e.g. M2k5.fp --> hole_M2.5.fp
3. shifted coordinates and widths of hole* to the next preferred metric value
4. moved hole_unplated.sym to obsolete
5. introduced hole_non-plated.sym
6. added con_1x16.sym

08/august/2014

1. added ind_1812.fp
2. added diode_vert.sym

05/september/2014

1. updated blocks
2. removed XLR-78xx-79xx.sym
3. added supply_with_virtual_GND.sym

03/september/2014

1. added BOX_HAMMOND_1593J_COVER.fp and BOX_HAMMOND_1593J_BASE.fp
2. added con_rj45.sym
3. added protective_earth.sym

01/august/2014

1. modified rGND.sym to comply with IEC standard

30/july/2014

1. switched to "edit" rather than "gedit"
2. moved to obsolete: LM317.sym, LM337.sym, LM399.sym

24/july/2014

1. Attempt to resync the CVS repo at gedasymbols.org

10/july/2014

1. add BOX_HAMMOND_27134PSLA.fp
2. add BOX_HAMMOND_11541PSLA.fp
3. add BOX_HAMMOND_27969PSLA.fp

28/may/2014

1. add nopaste flag to the oblong pads of TO*.fp
2. no solder mask on thermal part of MINICIRCUITS_MMIC.fp

16/may/2014

1. add SMD trimmer footprint BI_MODEL35.fp

10/february/2014

1. add ALPS_RK09K111.fp
2. slight reorganization of footprint subdirs ("discrete" --> "discretes", "potentiometer" --> "potentiometers", ...)
3. rework of diode SMD footprints
4. add dio_0805.fp

04/september/2013

1. add BOX_HAMMOND_1590DD.fp
2. add BOX_HAMMOND_1590Q_BOTTOM.fp
3. streamlined the line thickness of silk in HAMMOND box footprints
4. streamlined the line thickness of silk in elcap footprints

06/july/2013

1. more subdirectories

04/july/2013

1. set nopaste for the pads of the SMA edge connector footprints
2. renamed SMA_EDGE* back to SMA_edge*
3. corrected RIANCON*.fp to RIACON*.fp

01/july/2013

1. added RIACON_383_4PIN.fp
2. added RIACON_383_4PIN_LAY.fp
3. added RIACON_383_5PIN.fp
4. added RIACON_383_5PIN_LAY.fp
5. added con_1x5.sym

13/may/2013

1. renamed SMA_edge.fp to SMA_EDGE for consistency with the other connectors
2. add SMA_EDGE2.fp -- Same as SMA_EDGE.fp, but no GND pads on top layer

08/may/2013

1. fixed schaltplandruck.sh.

30/april/2013

1. add opamp_with_pwr_pins.sym

29/april/2013

1. corrected the slots of optocoupler_HCNR20_PD.sym
2. obsoleted L165*.sym -- replaced by driver_TDA2030
3. add symbol driver_BUF634.sym

16/april/2013

1. add symbol varistor.sym
2. add footprints
   1. var_8mm.fp
   2. var_8mm_lay.fp
   3. var_10mm.fp
   4. var_10mm_lay.fp
3. add optocoupler_HCNR20_PD.sym, optocoupler_HCNR20_LED.sym

11/april/2013

1. add customizable power symbols
   1. custom_plus.sym
   2. custom_minus.sym
   3. custom_GND.sym

05/april/2013

1. add link XLR3_AC3FDZ.fp to XLR3_NC3FDL.fp
2. renamed con_XLR_power.fp to con_3pin_supply.fp

20/march/2013

1. moved scripts to a dedicated folder
2. updated schaltplandruck.sh to use the new "gaf export" facility
3. layoutdruck.sh now emits *.eps for use in lyx documentation
4. added schematic and layout stubs to lyx template

18/march/2013

1. add elko_RM5_RM35.fp

15/march/2013

1. add XLR3_NC3FDL.fp
2. add con_XLR3.sym

13/march/2013

1. add elko_RM75_D16_lay.fp
2. add elko_RM75_D16_tyrap.fp
3. add elko_RM5_D10_lay.fp
4. add elko_RM5_D10_tyrap.fp
5. homolugated elko_*.fp
6. tweaked set_linewidth.sh
7. tweaked PS-3.sym
8. made pin numbers visible of optocoupler_schmitt_trigger_PC900.sym

07/march/2013

1. add MINICIRCUITS_4PIN.fp
2. increased hole diameter of MINICIRCUITS_8PIN.fp
3. made SMA_edge.fp fit actual connectors

22/february/2013

1. add COPAL_CHS02B.fp
2. add COPAL_CHS04B.fp
3. add COPAL_CHS08B.fp
4. add COPAL_CHS10B.fp
5. add dipswitch_2x.sym
6. add dipswitch_6x.sym
7. add dipswitch_8x.sym
8. add dipswitch_10x.sym
9. modified dipswitch_4x.sym

21/february/2013

1. add rf_switch_minicircuits_PSW-1211.sym
2. add low_pass_filter_minicircuits_PLP-xxx.sym
3. add oscillator_minicircuits_POS-xxx.sym
4. add variable_attenuator_minicircuits_TFAS-1
5. add MINICIRCUITS_4PIN_SMD.fp

14/february/2013

1. add ALPS_RK11K113.fp
2. linewidth of silk in potentiometer footprint set to 0.2 mm.

12/february/2013

1. add MIYAMA_MS500A.fp, aka MTS-1.fp
2. corrected set_linewidth.sh for regular lines
3. renamed schalter*.sym to switch_*.sym

07/february/2013

1. add optocoupler_VOM1271.sym and VOM1271.fp
2. add optocoupler_PVI1050.sym

04/february/2013

1. more generous holes for jumper footprints
2. add LORLIN_1x12.fp, LORLIN_2x6.fp, LORLIN_3x4.fp, LORLIN_4x3.fp
3. add slotting to switch_2x6.sym, switch_3x4.sym and switch_4x3.sym

03/february/2013

1. add banana-jack.fp
2. add RJ45_8P8C_lay.fp and RJ45_8P8C_vert.fp
3. add con_1x8.sym
4. minor bug in set_linewidth.sh

28/january/2013

1. add DIP28.fp
2. add DIP28_wide.fp

21/january/2013

1. more subdirectiories for symbols
2. add configurable divider ICS674-01 (ICS674-01_A.sym, ICS674-01_B.sym, ICS674-01_pwr.sym)
3. add optocouplers
   1. optocoupler_darlington.sym
   2. optocoupler_photoFET_H11F.sym
   3. optocoupler_schmitt_trigger_PC900.sym

1/november/2012

1. add symbols for a CPLD, Altera MAX II, TQFP-100
2. moved ATXMega_TQFP.fp to TQFP.fp

31/october/2012

1. add BOX_BOPLA_E410.fp
2. fixed do_gerbers part of new_geda_project.sh
3. beautified enclosing.sym

28/october/2012

1. add LED_1206.fp
2. add license-info to title blocks
3. minor beautyfication of res_vert
4. add LED_1206 footprint to footprints attribute of led.sym

12/august/2012

1. added a script to set the width of silk lines in footprints

11/august/2012

1. applied set_clearance.sh to connector footprints
2. applied set_clearance.sh to potentiometer footprints
3. applied set_clearance.sh to switch footprints
4. applied set_clearance.sh to resistor, capacitor, inductor footprints

08/august/2012

1. increased annular ring of thru hole diode footprints

06/august/2012

1. improved set_pinnumber.sh script
2. add hierarchy demos
3. applied set_clearance.sh to a number of generic footprints

04/august/2012

1. set_clearance.sh --> a script to set polygon clearance and mask clearance of pads and pins in a layout or in a footprint.
2. set clearance of SO*.fp, TO*fp and DIP*.fp to decent values (1.0mm and 0.1mm)
3. added crop of postscript output to layoutdruck.sh to compensate for bugs in EPS HID.
4. corrected pin numbers of regulator_positive_fixed.sym

25/july/2012

1. removed pinseq and device attributes from subsheet symbol templates
2. added geda.sh --> a simple command to open both, gschem and pcb of a project
3. removed geda-test.sh --> not necessary anymore
4. beautified subsheet.sym and subsheet2.sym
5. add a thermal pad to the footprints TO220_xxx_LAY.fp

18/july/2012

1. beautified con_1x*.sym
2. obsoleted con_pm_Ub.sym

16/july/2012

1. obsoleted res_RM??.fp in favor of res_???mil.fp

15/july/2012

1. renamed:
   1. npn.sym --> npn_transistor.sym
   2. pnp.sym --> pnp_transistor.sym
2. reorg of analog symbols. Dir "analog" contains only integrated components, now. Discretes live in their own dir.
3. changed gafrc template to do component-library-search
4. added ind_400mil.fp
5. renamed ind_RM75.fp to ind_300mil.fp
6. removed ind_RM5.fp

13/july/2012

1. corrected pin numbers / pin names of voltage regulaters in SOT89 package
2. added relay_DPDT and corresponding RELAY_T7CV5D.fp
3. obsoleted relay-AXICON_FP2.sym
4. added relay_SPDT.sym
5. obsoleted res_thru.sym, res_thru_vert.sym, res_SMD.sym, res_SMD_vert.sym
6. added res_horiz.sym, res_vert.sym
7. renamed
   1. res_RM75.fp --> res_300mil.fp
   2. res_RM10.fp --> res_400mil.fp
   3. res_RM15.fp --> res_600mil.fp
   4. res_RM20.fp --> res_800mil.fp

12/july/2012

1. obsoleted by potentiometer.sym and potentiometer_vert.sym:
   1. poti_thru.sym
   2. poti_thru_vert.sym
   3. poti_Spectrol_534.sym
   4. poti_Alps_RK11K112.sym
2. renamed:
   1. trimmer_long.fp --> VISHAY_T18.fp
   2. trimmer_steh.fp --> VISHAY_T93YB.fp
   3. trimmer_steh_gerade.fp --> VISHAY_T93YA.fp

11/july/2012

1. obsoleted res0805.sym
2. shortened the pins of res_thru.sym
3. beautified comparator.sym and shottky.de
4. renamed:
   1. dio_RM10.fp --> dio_400mil.fp
   2. dio_RM75.fp --> dio_300mil.fp
   3. tvs_RM10.fp --> tvs_400mil.fp
   4. dio_1206.fp --> dio_minimelf.fp
5. obsoleted zener_thru.sym, zener_SOT23.sym and zener_SMD.sch

10/july/2012

1. renamed jumper_um.sym to jumper_3pin.sym
2. beautified jumper footprints
3. additional thickness for every fifth via row in the perfboard footprint

03/july/2012

1. add AKL_2PIN.pcb AKL_3PIN.pcb AKL_4PIN.pcb AKL_5PIN.pcb

20/june/2012

1. replaced 78*.sym and 79*.sym by more versatile symbols with more telling names. The old symbols went to the obsolete-dir
   1. regulator_positive_fixed.sym
   2. regulator_positive_variable.sym
   3. regulator_negative_fixed.sym
   4. regulator_negative_variable.sym
2. added footprints for regulators:
   1. SO8_78Lxx.fp
   2. SO8_79Lxx.fp
   3. SO8_LM317.fp
   4. SO8_LM337.fp
   5. SOT89_78LxxA.fp
   6. SOT89_79Lxx.fp

08/june/2012

1. update of URLs that point to national semiconductor. Docs are now at ti.com

18/april/2012

1. moved jumper_SMD.sym to obsolete
2. moved instr_amp_SO8 to obsolete
3. added instr_amp_8pin -- generic instrumentation amplifier
4. removed local gafrc from new_geda_project script.
5. added DIP12.fp DIP14.fp DIP16.fp DIP18.fp DIP20.fp DIP24.fp DIP24_wide.fp DIP40_wide.fp DIP6.fp DIP8.fp

27/march/2012

1. added dir for obsolete symbols
2. moved cap_SMD.sym, cap_thru.sym amd cap_SMD_vert.sym to obsolete
3. added cap_horiz.sym
4. improved new_geda_project.sh

12/december/2011

1. added tvs_RM10.fp
2. a more general symlib path in the gafrc installed by new_geda_project.sh

2/november/2011

1. renamed HF_MULTI.fp to HF_multi.fp
2. added opamp_offset2.sym - an opamp with offset at pin 1 and pin 8
3. more clearance to SCSI footprints

28/sptember/2011

1. renamed 7474112_2xJK.sym32_4x_OR.sym to 7432_4xOR.sym
2. renamed 74112_2xJK.sym to 74112_2xJK_flipflop.sym

24/august/2011

1. add LED_5mm.fp
2. moved LED_3MM.fp to LED_3mm
3. moved dio_RM5.pcb to dio.pcb

08/august/2011

1. add layer_content.sh (cut and paste layer content)
2. add set_linewidth.sh (manipulate the linewidth of selected tracks)

19/july/2011

1. add IGBT-symbols: igbt.sym, igbt_diode.sym
2. add IGBT footprints: TO220_GCE.fp, TO220_GCE_LAY.fp, TO247_GCE_LAY.fp
3. add IR2110.sym and IR2110S.sym -- low-side/high-side IGBT driver

14/july/2011

1. beautified opamp symbols
2. add SCSI_help.fp and SCSI_help2.fp

09/july/2011

1. renamed pin template symbols, so they don't contain hyphens.
2. add con_2x10a.sym, same as con_2x10.sym but with alternate pin numbering
3. unified the power symbols
4. moved vcc-minus.sym to vee.sym

05/july/2011

1. beautified in.sym and out.sym and changed device to PORT
2. add set_net_of_port_symbol.sh

27/june/2011

1. corrected pad_round.fp and pad_square.fp (wrong side of the board)

20/june/2011

1. started a page for the essential lib

15/june/2011

1. added pin_meas.fp pin_0.5mm.fp pad_square.fp pad_round.fp pin_1mm.fp
2. removed pad_60x60.fp pad_SMD.fp pad_SMD_round.fp
3. moved PAD.pcb to pad.pcb

3/june/2011

1. beautified switch symbols. Added symversion attributes, removed numslot attribute, removed device attribute.
2. swapped pin numbers of dipswitch_4x.sy for compatibility with the other switch symbols

2/june/2011

1. corrected footprint attribute in several connectors.

31/may/2011

1. add SO16W.fp, SO20.fp, SO20W.fp, SO24W.fp
2. typo in set_pinnumber.sh

28/may/2011

1. more symbol beautification
2. corrected the default footprint of pmosfet.sym

26/may/2011

1. filled logic bubbles to beautify digital symbols

13/may/2011

1. corrected wrong pinout of 78L05_SO8.fp and moved to 78Lxx_SO8.fp
2. increased annular rings of some TOxxx.fp
3. add script to set the number_of_pages attribute in schematics

9/may/2011

1. increased pad size of cap_RM*.fp
2. add cap_RM5_c.fp -- small outline package
3. corrected pin numbers of various switches. Increased annular ring, too.

18/april/2011

1. corrected pinnumbers of header footprints with elongated pads.
2. add AMP_4.2mm_header_20pin_lay.fp header similar to the ones used for mother boards
3. improved schaltplandruck --> sort schematics according to page attribute

13/april/2011

1. minor beautification of comparator_quad_pwr.sym, 7400_4xNAND.sym, analog_switch_DG468.sym
2. add SCSI_VHDCI_cable_lay.fp

21/march/2011

1. add versions with oblong pins to the series of footprints for two row headers.

14/march/2011

1. better clearance of DIOTEC_*.fp

3/march/2011

1. add SOT886.fp
2. add RCA_DUAL_CUI_RCJ22.fp
3. add BNC_DUAL_BOMAR364.fp

1/march/2011

1. replaced (getenv "PWD") with "." in new_geda_project.sh to make gschem start up properly from nautilus.

21/february/2011

1. add LM317_SO8.fp variable voltage regulator in SO8 package
2. add DPAK_GDS.fp DPAK with pins named for power P-MOSFETs like IRL5602
3. add AMP_4_2mm_header_20pin_lay.fp an ATX like 20 pin power connector
4. add 2x20PIN_PSL.fp a 40 pin header with interlock mechanism
5. add 2x4socket.fp eight pin socket with two rows
6. put changelog in extra page

19/february/2011

1. improved oblong pads with TO*.fp and SUBD*.fp (mask smaller than polygon clearance)
2. polished SO14.fp, SO16.fp, SO28W.fp, SO8.fp, SOT363.fp (better mask)
3. add SO8_FET.fp for power MOSFETs in SO8 design
4. enlarged annular rings in PENTAWATTV footprints
5. add convenience script extract_footprints.sh
6. add convenience script set_name_value_description.sh
7. add led_bicolor_4pin.sym, a slotted symbol for bicolor LEDs with four pins
8. add LTST-C155.fp - a footprint for a bicolor SMD LED by LITEON
9. polished the diodes: triangles more equilatral

8/february/2011

1. oblong pads and a square No1 pin with TO220**.fp and TO92**.fp
2. find_missing_symbols.sh

3/february/2011

1. beautified subD9.sym, subD15.sym, subD25.sym
2. new subsheet-2.sym, template with pins 400 units apart
3. add 12V+.sym, 12V-.sym
4. add supply_with_variable_regulators.sym
5. shortened the pins of elko.sym to make it compatible with cap_SMD_vert

2/february/2011

1. add res_zero.sym
2. reworked subsheet.sym
3. add footprints and values to dus.sym, comparator_quad.sym
4. polished 7905.sym

26/january/2011

1. add con_SMA.sym
2. fixed license in con_BNC.sym
3. add footprint list to con_BNC.sym

26/january/2011

1. add subD15.sym

31/december/2010

1. corrected URL to SPECTROL_534.fp

12/december/2010

1. add .gitignore to new_project.sh
2. polished subsheet.sym
3. polished pin-*.sym
4. add subsheet_in_out.sym, a convenience symbol for subsheet generation

8/december/2010

1. add schaltplandruck.sh, a recursive print script for gschem schematics
2. add block symbol resistor_dipswitch_beanstalk.sym, a stack of configurable resistors
3. larger pins at cap_RM275.fp

7/december/2010

1. polished 74161_COUNTER.sym and moved to 74161_counter.sym
2. polished 74163_COUNTER_DECIMAL.sym and moved to 74163_counter_decimal.sym
3. add pin_left.sym, pin_right.sym, pin_top.sym, pin_bottom.sym convenience symbols
4. add 555.sym and 556.sym, single and dual. general purpose timers.

3/december/2010

1. add 0805xs.fp extra small pads
2. move 0805r.fp to 0805s.fp
3. move 0402r.fp to 0402s.fp
4. add 0603.fp
5. beautified dio_1206, fp dio_1210, fp dio_1812.fp, tantal_7x4mm.fp, tvs_1812.fp, 0805.fp, 1206.fp, 1210.fp, SOT89.fp

23/november/2010

1. add SO8_FET, MOSFET footprint, SO8 style.
2. add list of footprints to res_thru
3. moved hole footprints from misc/ to a separate dir
4. changed default refdes of pad_2.sym to refdes=PAD?

8/november/2010

1. add SOT89.fp
2. add TO252.fp, aka DPAK.fp
3. add footprints list to 7805.sch

1/november/2010

1. add socketed resistor res_socket.sym, res_socket.fp
2. clean-up of res_RM**.fp (metric holes, larger annulus, mark at pin 1)
3. add perfboard.sym
4. renamed lochraster*.fp to perfboard*.fp

28/october/2010

1. redefined existing holes and added some more.
2. add footprint template

26/october/2010

1. add RIACON_3PIN_LAY.fp and RIACON_2PIN_LAY.fp

16/october/2010

1. more annulus to SMA_*.fp and BNC_*.fp
2. more annulus to RIACON_2PIN.fp
3. add RIACON_3PIN.fp
4. add HF_MULTI.fp a footprint for various coaxial connectors
5. renamed TFQP100.fp to ATXMEGA_TFQP100.fp

12/october/2010

1. add multiplexer_DG406.sym
2. add 2x13PIN.fp
3. polished 2x13PIN_WSL.fp

8/october/2010

1. renamed TFQP100.fp to TQFP100.fp

4/october/2010

1. add TFQP100.fp

1/october/2010

1. add mark_2.fp, a square production mark
2. renamed MARKE.fp to mark_1.fp
3. fixed usage comment in set_pinnumber.awk
4. add TO220_block.fp, generic TO220 mounted to a cooling block
5. add oblong pads to the pins of TO220*.fp
6. add flag nopaste to oblong pads of TO92*.fp

28/september/2010

1. add SMA_EDGE.fp, a SMA footprint to be soldered from the edge of the PCB
2. add cuboid_5x9mm_SMD, a brass cuboid to be soldered to a polygon
3. add cuboid.sym, a cuboid symbol
4. add LT1719, a specific comparator

27/september/2010

1. polished 78L**.sym and 79**.sym
2. improved supply block and moved to supply_with_regulators.sym

26/september/2010

1. add EL7222.sym, a line driver
2. add nc.sym, to mark deliberately not connected pins
3. add author attribute to 78**.sym and 79**.sym
4. polished ATmega32TQFP.sym
5. add ATxmegaA1.sym

23/september/2010

1. add inductor_vert.sym

22/september/2010

1. corrected subD25.sym --> shield is pin number 0, rather than 26

11/september/2010

1. add elko_RM10_D22.fp
2. moved PS_**PIN_lay.fp to PS_**PIN_LAY.fp
3. moved SCSI_68pin.fp to SCSI_68pin_vert.fp
4. larger screw holes in SCSI footprint
5. bug fix in.sym

3/august/2010

1. more annular ring in res_RM5.fp and res_RM5_b.fp

2/august/2010

1. added 2x13PIN_WSL.fp
2. fixed footprint attribute of nmosfet.sym
3. added SUBD15_male_lay.fp SUBD25_male_lay.fp SUBD37_male_lay.fp
4. decorated SUBD*.fp with oval pads for easier soldering

27/july/2010

1. added TO92 FET footprint with alternative pin allocation, TO92_DGS
2. added generic TO92 footprint TO92_123.fp
3. modified TO92* footprints for elongated pads

26/july/2010

1. bug-fix subD25.sym
2. added SO28W.fp

13/july/2010

1. added schalter_1x_mittel.sym switch in middle position
2. added an outline to lochraster2.pcb
3. marked pin 1 of res_*.fp with the square flag

5/july/2010

1. added convenience script set_pinnumber.awk

29/june/2010

1. embedded components in symbols of the block section.

28/june/2010

1. removed SCSI footprint SCSI_68pin_female.fp
2. renamed SCSI_68pin_male.fp to SCSI_68pin.fp
3. added SCSI_VHDCI_cable.fp
4. added coded_switch_4bit.sym and ELMA_C08.fp
5. added subD25.sym

15/june/2010

1. added SCSI footprint matching footprint SCSI_68pin_female.fp

14/june/2010

1. added SCSI connector symbol con_SCSI68.sym
2. moved pins of res_RM??.fp to multiples of 50 mil

31/may/2010

1. add quad_analog_switch_closed.sym -- an opening analog switch, e.g. DG212.
2. add res_thru_vert.sym, vertically drawn thru hole resistor.
3. larger annular rings with 1x1PIN.fp, 1x3PIN.fp, 1x5PIN.fp, 2x3PIN.fp,
4. beautified con_2x8.sym, con_2x3.sym
5. correcter pin numbers of con_2x20.sym
6. added work sheets 1xnPIN.pcb and 2xnPIN.pcb
7. added 2x2PIN.fp, 2x4PIN.fp, 2x5PIN.fp 2x8PIN.fp
8. renamed 2x20pin.fp to 2x20PIN.fp
9. renamed AKL_4Pin.fp to AKL_4PIN.fp
10. renamed con_2x16-2.sym to con_2x16.sym and larger annular rings.
11. added con_2x10.sym, con_2x16.sym, con_2x2.sym, con_2x32.sym

26/may/2010

1. add poti_thru_vert.sym
2. add trimmers.pcb
3. corrected default footprint of res_thru.sym
4. enlarged annular rings of ALPS_RK11K112.fp

25/may/2010

1. add lochraster2.fp a grid of holes

18/may/2010