Henry Wolfe

Henry Wolfe
Email: henry.wolfe at openmail.cc Use all footprints and outlines at your own risk. Some have been tested. Some have not.

Symbols

MQ3 Gas Sensor
Companion footprint for symbol. There's another MQ Gas sensor symbol in gedasymbols,
you might want to use that instead. There's currently no footprint aside from this.
Tested?: Yes. Rev 2 expands the outline to fit around the edge better.
J00-0065NL-Magjack-RJ45
RJ-45 with magnetics. Also called Magjack. Works with ENC28J60.
Tested?: Yes. Rev 2 adds 1 mm to the connector end so the white line goes nicely over the edge as with other footprints here.
PKMCS090E4000-R1_Buzzer
Piezoelectric buzzer.
Tested?: Yes
testpoint-1mm-hole
Follows generous A standard through hole sizing. Fits a jumper cable with room to spare.
DPAK__On-Semiconductor_XL
A D-Pak package with extra pad space on the bottom and top to make hand soldering easier.
Tested?: I've tested the original which is of smaller size, so this one will work.

1591XXBSFL Hammond Case
Mid sized case. Inches 4.4x2.5x1.1
Tested?: This is rev 2 and should fit in the bottom of the case. Rev 1 fits, with some slight sanding into the top part of the case only. Testing rev 2 shortly. Use at your own risk until then.